• KK-Sähkötukku Oy
  • +358 207 815 260
  • info@kk-sahkotukku.fi

Etsi tuotteita

11032

Wall mounting socket outlet 16A 3p > 50V up to 250V DC 3 h, IP44

Wall mounting socket outlet
16A 3p (2P+PE) > 50V up to 250V DC (over 50 up to 250V) 3 h IP44,
Frequency: direct current (DC),
Colour code: gray RAL 7035
Dimension of enclosure: 87×64 mm (HxW),
Contacts: The contact carrier is made of polyamide, the contacts are brass nickel plated,
Maximum conductor size: 4,0 qmm,
Material of enclosure: Polyamide,
Connection system: with screw terminal,
Cable entry: top entry M20,
Colour of appliance: Hinged lid grey, Housing bottom grey, Housing top grey, Collar grey,
Height of device: 118 mm, Width of device: 64 mm, Depth of device: 104 mm,
Other technical features: The cable entry is one at top open and one at bottom and one rear side closed, Lower part of housing rotatable by 180°

Share

Product description

BALS Product number 11032
BALS EAN 4024941110327
Product category , ,
Number of poles (P) 2P+PE
Number of poles (P99) 3p
Position of earth contact 3 h
Voltage (V) over 50 up to 250V
Degree of protection IP44
Connection design with screw terminal
Dimensions (WxHxD) 64x118x104 mm

Wall mounting socket outlet
16A 3p (2P+PE) > 50V up to 250V DC (over 50 up to 250V) 3 h IP44,
Frequency: direct current (DC),
Colour code: gray RAL 7035
Dimension of enclosure: 87×64 mm (HxW),
Contacts: The contact carrier is made of polyamide, the contacts are brass nickel plated,
Maximum conductor size: 4,0 qmm,
Material of enclosure: Polyamide,
Connection system: with screw terminal,
Cable entry: top entry M20,
Colour of appliance: Hinged lid grey, Housing bottom grey, Housing top grey, Collar grey,
Height of device: 118 mm, Width of device: 64 mm, Depth of device: 104 mm,
Other technical features: The cable entry is one at top open and one at bottom and one rear side closed, Lower part of housing rotatable by 180°

Current

Number of poles (P)

Number of poles (P99)

Voltage

Voltage range

Position of earth contact

Protection degree

Connection design